Skller - no pressure in bullets tank
Fantasy Park :: General :: Video Games
Page 1 of 1
Skller - no pressure in bullets tank
If there is no pressure in tank and air compressor is OK, next thing we must check is this valve You can se on photo below.
By turning red cap You can adjust pressure in bullets tank. Pressure value can be read from manometer. If pipes are not filled with bullets then press few times blue valve - marked on photo below
Also You can check if the filling cap is properly closed if it is not, air will go under the gasket in the cap.
By turning red cap You can adjust pressure in bullets tank. Pressure value can be read from manometer. If pipes are not filled with bullets then press few times blue valve - marked on photo below
Also You can check if the filling cap is properly closed if it is not, air will go under the gasket in the cap.
korreks- master spamer
- Posts : 258
Join date : 2010-08-05
Age : 43
Location : Ruda_Śląska
Fantasy Park :: General :: Video Games
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|